Mold Removal in Grafton, WV West Virginia 26354

Do you require a Licensed Mold Removal Company ASAP?

Call 1-888-217-6019 now.

Expert help is just one phone call away.

Simple Indicators That You Might Have a Mold Problem

  1. A sour smell. It's a unique smell. Even if you can't discern anything, you know it's there.
  2. Visible Microbial Growth. Dark splotches on the walls, ceiling flooring, or baseboards. Splotches across the ceiling may be a sign of a leaky roof, burst pipe, or condensation in ductwork. Dark spots or brown or black mold that are visible on the walls may indicate cracks or burst pipe that is hidden behind the wall. It may be an incipient leak, but the damage can only become worse.
  3. soft moist spots on the Floors, Walls or Ceiling. This may be a sign that there is microbial growth may be present. Mold may have not been visible yet however it may be behind the drywall or on the supportive studs, under flooring, or in the roof of your home.
  4. Unexplained illness. The constant headaches, coughing, nausea or being sick only in home or in certain areas. These symptoms that persist could indicate that mold may be present. The four most vulnerable groups to illnesses caused by mold include:
    • Children
    • Senior citizens
    • Immune-compromised
    • Pregnant Women
  5. Recently Flood Event. The spores require water to grow, so an earlier water leak or flood, or sewer back-up could have caused the proper water activity required for support mold growth.
If you notice any of these symptoms, call now for a comprehensive mold inspection. Certified and comprehensive testing will be offered. If there's an problem, professionals can find it and repair it.

Superior Mold Removal

Fast, reliable mold removal services for a cleaner home and a healthier family. Certified experts, advanced equipment, and professional results. Call today!

Phone: 1-888-217-6019

FEATURED
Professional mold removal companies are equipped with the equipment, personnel with the right training and knowledge to tackle mold problems from the beginning to the completion. They can identify your problem, determine the right course of course of action and start immediately. Trained and certified technicians can complete the services needed to ensure your home safe for your family again. Professional mold removal services typically comprise:

Water:

  • Water Damage Restoration
  • Water Extraction
  • Flood Damage Repair
  • Dehumidification

Mold:

  • Certified Mold Inspections
  • Mold Damage Remediation
  • Air Quality Testing

Areas of Service:

Mold removal services are typically available in different locations, which includes but not limited only to location, its immediate areas, and the region beyond.

Contact Mold Removal Experts 24/7

Contact for immediate assistance! 1-888-217-6019

Proudly Serving location

A wide array of services comprising water damage restoration, inspection, and mold removal is available. Contact us today for an comprehensive mold inspection in your home or business. A Indoor Environmental Professional (IEP) can evaluate the type and extent of the contamination in your property and help restore it to the healthy state.

Typical 10 Step Procedure for removing mold

  1. Find the Source. Locate the origin of the water intrusion. It must be determined and rectified so as to prevent the water intrusion to from happening again.
  2. Visual Inspection of the Water Damage. Expert technicians look for obvious microbe growth and look in areas that could be overlooked.
  3. Diagnostic Testing. The equipment is specially designed to "sniff out" undetectable mold and other mold that may be hiding behind walls, on stud framing and drywall. The mold testing meters ensure thorough identification. When necessary, air sample tests can be taken by a certified mold assessor or Indoor Environmental Professional (IEP). The IEP collects samples and examines every room suspected of having mold. Every mold isn't the same, and the appropriate tests can separate deadly mold from nuisance mold.
  4. Establish Containment. Protecting the members of the family and the remainder of the home from airborne mold spores by establishing containment. This establishes an safe border for removal of the mold to start. The type of containment used will vary depending on the zone of contamination:
    • Source: small areas of contamination smaller than 10 sq. ft. Bagged and removed.
    • Local is an area that can be sealed off and remedied, usually 10 sq. feet. to 100 sq. ft.
    • Full containment areas that require the use of a temporary containment barrier for temporary containment to prevent cross-contamination. The barrier is used to isolate the whole room or multiple rooms.
  5. Air Filtration. Installment of portable air filtration units to purify the air and improve air quality in the home. The protection of the family from airborne pathogens is accomplished by establishing negative air tension between the affected area and the rest of the home.
  6. Take out the Mold. Behind security barriers, technicians start to remove materials that are impacted by mold. This may include drywall, baseboards as well as sinks, cabinets or counters, and flooring in the kitchen. The removal of drywall on ceilings or insulation may be necessary if there was a roof leak is involved. It might involve removing tubs or fixtures in the bathroom if it has penetrated the walls because of leaky pipes. Highly skilled technicians are meticulous in keeping what is kept while also making sure removal of any trace of mold.
  7. Mold Treatment. After damaged materials have been removed professional grade treatment and removal products are employed, following IICRC guidelines. The rest of the surfaces are cleaned and treated.
  8. Air Purification. Once removal and treatment complete, the treatment and removal completed, air purification is performed for a number of days.
  9. Post-Remediation Air Sample Testing. Once the air purification protocol is complete after the air purification protocol is completed, following remediation air sample testing is conducted and must be awarded a passing mark in accordance with the IEP.
  10. Equipment Removal. After the post-remediation testing is completed and air tests are deemed acceptable by an certified mold assessor or IEP, containment barriers and equipment are removed. This provides a clean canvas for bringing in contractors to install the walls or flooring or renovate the kitchen or bath as needed.

What to Look for When Hiring an Mold Remediation Company

  • The Right Price Reputable mold removal firms will never charge for more work than necessary. They carefully inspect homes and suggest the work necessary in order to bring the home to an healthy condition. Be wary of businesses that may increase prices or pad bills.
  • The Right Ethics Look for well-respected companies in the location and the surrounding areas. They should have fair rates and only suggest work that is necessary in order to restore your home and ensure your family's safety. Reputable companies stand behind their work 100%.
  • The Right Time NOW! If you notice mold that is causing you problems, you need to get rid of it immediately. Get someone in touch to start the drying process to identify the root of the issue, and begin testing to identify the solution to the problem.
  • The Best Practices Ensure that the mold removal company utilizes safe practices to protect your family. For instance, safe methods like HEPA vacuuming for dust and spore control are always preferable over misting, which can bring an increase in moisture into the space.
  • The Credentials You Need Find professionals certified in Water Restoration Technician (Water Restoration Technician), ASD (Applied Structural Drying), and AMRT (Applied Microbial Remediation Technician).
  • The Right Team Professional teams work to the highest standards every day. From the beginning of the phone call up to the post-remediation inspection They should treat every client as family and every home in the same way as it were their own.
 

We're Here To Help!

Phone us now: 1-888-217-6019

 
Updated April 23, 2025