Mold Removal in Guthrie, OK Oklahoma 73044

Do you require the help of a Licensed Mold Removal Company ASAP?

Call 1-888-217-6019 now.

Expert help is just a phone call away.

Simple Indicators That You Might have a Mold Issue

  1. The smell of mold is quite distinctive. It's a unique smell. Even if you don't see anything, you still know it's there.
  2. Visible Microbial Growth. Dark splotches on the ceilings, walls, floors, or baseboards. Splotches in the ceiling may suggest a leaky roof, burst pipe, or condensation in ductwork. Dark patches or brown or black mold on the walls may suggest cracks or burst pipe that is hidden behind the wall. It may be a slow leak, but the damage will only get worse.
  3. Soft moist areas on the floors, walls or Ceiling. This could indicate that microbial growth is present. The mold may not be visible right now, but it could be behind the drywall, on the supportive studs, under flooring, or in the attic of your home.
  4. Sudden Unexplained health issue. A constant cough, headache or nausea or feeling ill only when you are at home or in certain areas. These symptoms that persist may indicate mold exists. The four most vulnerable groups to illnesses caused by mold include:
    • Children
    • The Elderly
    • Immune-compromised
    • Pregnant Women
  5. Recently water Event. The spores require water to grow, so the recent water leak or flood, or sewer back-up could have triggered the proper water activity required to support mold growth.
If you notice any of these signs, call now for a comprehensive mold inspection. Certified and comprehensive testing is offered. If there's any problem, professionals can find the issue and solve it.

Superior Mold Removal

Fast, reliable mold removal services for a cleaner home and a healthier family. Certified experts, advanced equipment, and professional results. Call today!

Phone: 1-888-217-6019

FEATURED
Professional mold removal companies are equipped with the equipment, staff, education and knowledge to tackle mold problems from beginning to ending. They can identify your problem and determine the right plan of actions and begin the process right away. Professionally trained and certified technicians are able to provide the services required to make your home safe to your family again. Professional mold removal services typically comprise:

Water:

  • Restoration of Water Damage
  • Water Extraction
  • Flood Damage Repair
  • Dehumidification

Mold:

  • Certified Mold Inspections
  • Mold Damage Remediation
  • Air Quality Testing

Areas of Service:

Mold remediation services are usually available in different locations, which includes but not limited only to location as well as its adjacent areas, and the region beyond.

Contact Mold Removal Experts 24 hours a day, 7 days a week.

Contact us, and help will be provided immediately! 1-888-217-6019

Proudly Serving location

A complete array of services including water damage restoration, inspection, and mold removal is readily available. Call today for a comprehensive mold inspection in your home or business. An Indoor Environmental Professional (IEP) will evaluate the type and degree of contamination in your property and assist in helping restore it to an healthy state.

Typical 10 Step Process for Mold Remediation

  1. Find the source. Determine the origin of the water intrusion. It must be determined and rectified to prevent the water intrusion occurring again. occurring again.
  2. Visual Inspection of the The Water Damage. Expert technicians look for visible microbial growth and look in areas that could be overlooked.
  3. Diagnostic Testing. Specialized equipment can "sniff out" invisible mold that may be lurking behind walls, on framing studs and drywall. The mold testing devices ensure thorough testing for. In the event that it is necessary, air sample tests can be conducted by a certified mold assessor or Indoor Environmental Professional (IEP). The IEP collects samples and tests every suspected room. All mold isn't the same, and the right tests can distinguish dangerous mold from nuisance mold.
  4. Establish Containment. Protecting the household and the rest of the home from the airborne mold spores by creating containment. This creates a safe border to allow removal of the mold to start. The type of containment employed will differ according to the location of contamination:
    • Source: small areas of contamination smaller that 10 sq. ft. Bagged and removed.
    • Local: an area that can be closed off and remedied, usually 10 sq. ft. up to 100 sq. ft.
    • Full-Containment areas where there is a need for a temporary containment barriers to prevent cross-contamination. The barrier is used to isolate an entire room or several rooms.
  5. Air Filtration. Installation of mobile air filtration units that purify the air and enhance air quality in the home. The protection of the family from the spread of airborne pathogens is achieved through the establishment of negative air pressures between the air-contaminated zone and the remainder of the home.
  6. Remove the Mold. Behind safety barriers, the technicians are able to remove materials impacted by mold. This may include drywall, baseboards, cabinets, sinks or counters, and flooring in the kitchen. The removal of drywall on ceilings or insulation may be necessary when there was a roof leak was involved. It may involve removing tubs or fixtures in the bathroom, if it has entered the walls because of leaky pipes. Skilled technicians are meticulous in keeping what is preserved while ensuring removal of any trace of mold.
  7. Treatment for Mold. Once the damaged materials were removed professional grade treatment and removal products are employed, following IICRC guidelines. The rest of the surfaces are then cleaned and treated.
  8. Air Purification. After removal and treatment is complete, air purification is performed for several days.
  9. Post-Remediation Air Sample Testing. Once the air purification protocol is complete, after the post-remediation air sample testing will be conducted and is given an A+ grade in accordance with the IEP.
  10. Equipment Removal. When after post-remediation testing is finished and air samples are deemed acceptable by an certified mold assessor or IEP, containment barriers and equipment is removed. This provides a clean canvas to bring in contractors to install flooring or flooring or remodel the kitchen or bathroom as needed.

What to Look for When Hiring a Mold Remediation Company

  • The Right Price A reputable mold removal companies will not charge for more work than needed. They will carefully examine homes and suggest actions necessary to restore the home to an healthy condition. Be cautious of companies that might overcharge you or pad bills.
  • The Right Ethics Look for well-respected companies in the location and surrounding areas. They should have fair rates and only recommend work that is absolutely necessary to restore your home and ensure your family's safety. Reputable companies stand behind their work 100%.
  • The Right Time NOW! When you have mold that is causing you problems, you need it removed now. Get someone in touch to start the drying process to identify the cause, and begin testing to identify the solution to the problem.
  • The right practices Be sure the mold removal company utilizes safe practices to protect your family. For example, appropriate methods such as HEPA vacuuming to control dust or spores control are superior to misting, which can introduce additional moisture into the zone.
  • The right credentials Seek out professionals certified in WRT (Water Restoration Technician), ASD (Applied Structural Drying), and AMRT (Applied Microbial Remediation Technician).
  • The Right Team Professional teams operate in accordance with the most stringent standards at all times. From the very first phone call until the post-remediation inspection, they should treat every customer like family and every home in the same way as it was their home.
 

We're Here To Help!

Phone us now: 1-888-217-6019

 
Updated May 18, 2025