Mold Removal in Trinity, NC North Carolina 27370

Do you require an Licensed Mold Removal Company ASAP?

Call 1-888-217-6019 now.

Assistance from a professional is only a phone call away.

Simple Indicators That You Might Have a Mold Problem

  1. The smell of mold is quite distinctive. It's a unique smell. Even if you can't see anything, you still know that it's there.
  2. Visible Microbial Growth. Dark splotches on the walls, ceiling floors or baseboards. Splotches in the ceiling may be a sign of a leaky roof or burst pipe or condensation in the ductwork. Dark patches or brown or black mold that are visible on the walls may be a sign of a cracked or burst pipe in the wall. It may be an incipient leak, but the damage will only become worse.
  3. Soft Moist Spots on the floors, walls or Ceiling. This could indicate that microbial growth is present. Mold may have not been visible yet but it may be hidden behind the drywall, on the supporting studs, beneath the floors, or in the attic of your home.
  4. Inexplicable Illness. A constant cough, headache or nausea or being sick only at home or in certain spaces. The persistent symptoms of allergies could indicate that mold exists. The four most vulnerable groups to illnesses caused by mold include:
    • Children
    • Senior citizens
    • Immune Deficient
    • Pregnant Women
  5. Recent water Event. The spores need water to grow, so the recent flood, leak flood, or sewer back-up may have caused the appropriate water activity needed to support mold growth.
If you notice any of these signs, call now for a comprehensive mold inspection. Certified and comprehensive testing is available. If you have a problem, professionals can find the issue and solve it.

Superior Mold Removal

Fast, reliable mold removal services for a cleaner home and a healthier family. Certified experts, advanced equipment, and professional results. Call today!

Phone: 1-888-217-6019

FEATURED
Professional mold removal firms have the equipment, personnel with the right and the training and expertise to deal with mold problems from beginning to end. They can identify your problem and then identify the best plan of action and start immediately. Professionally trained and certified technicians can provide the services necessary to make your home safe for your family again. Professional mold removal services typically include:

Water:

  • Restoration of Water Damage
  • Water Extraction
  • Flood Damage Repair
  • Dehumidification

Mold:

  • Certified Mold Inspections
  • Mold Damage Remediation
  • Air Quality Testing

Areas of Service:

Mold removal services are generally offered in many locations, including but not limited to location and its adjacent areas, and the region beyond.

Contact Experts in Mold Removal 24/7

Contact us, and help will be provided immediately! 1-888-217-6019

Proudly serving location and surrounding areas

A full assortment of services comprising water damage restoration, inspection, and mold removal is readily available. Call today for a comprehensive mold inspection in your home or business. An Indoor Environmental Professional (IEP) will evaluate the type and level of contamination in your property and assist in helping restore it to the healthy state.

Typical 10 Step Method to Remove Mold

  1. Find the Source. Locate the origin of the water intrusion. This must be pinpointed and remedied so as to prevent the water intrusion occurring again. repeating itself.
  2. Visible Inspection of the Inspection of the Damage. Expert technicians inspect for visible microbe growth, looking in places that may be overlooked.
  3. Diagnostic Testing. The equipment is specially designed to "sniff out" undetectable mold which may be hiding in the walls, on framing studs and drywall. Mold testing devices ensure thorough identification. If necessary, air sample tests can be taken by an certified mold assessor or Indoor Environmental Professional (IEP). The IEP takes samples and tests every suspected room. Each mold is not the identical, and the right tests will be able to distinguish deadly mold from just nuisance mold.
  4. Establish Containment. Protection of the family and the rest of the home from the airborne mold spores by establishing containment. This establishes an safe area for removal and work can begin. The kind of containment used will vary according to the zone of contamination:
    • Source: small areas of contamination smaller than 10 sq. ft. Bagged and removed.
    • Local is one room that can be sealed off and cleaned, typically 10 sq. feet. up to 100 sq. ft.
    • Full containment areas where there is a need for the use of a temporary containment barriers to prevent cross-contamination. The barrier is used to isolate the whole room or multiple rooms.
  5. Air Filtration. Installation of mobile air filtration units to cleanse the air and improve air quality in the home. Protecting the family from airborne pathogens is accomplished by establishing negative air tension between the affected area and the rest of the home.
  6. Take out the Mold. Behind safety barriers, the technicians begin to remove materials affected by mold. This may include drywall, baseboards as well as sinks, cabinets or counters, and flooring in a kitchen. Removal of drywall on ceilings or insulation may be necessary if a roof leak was involved. It might include removing tubs or fixtures in the bathroom, if it has penetrated the walls because of leaky pipes. Highly skilled technicians take great care in preserving what can be preserved while making sure removal of all traces of mold.
  7. Mold Treatment. After damaged materials have been removed professional-grade treatment and removal products are applied, following IICRC guidelines. The remaining surfaces are cleaned and treated.
  8. Air Purification. Once removal and treatment complete, the treatment and removal complete, air purification is performed for a number of days.
  9. Post-Remediation Air Sample Testing. After the air purification process is completed, following remediation air sample testing is carried out and is given an acceptable grade through the IEP.
  10. Equipment Removal. When post-remediation testing is complete and air tests are considered acceptable by a certified mold assessor or IEP, containment barriers and equipment are removed. This provides a clean canvas for bringing in contractors to install flooring or flooring or remodel the kitchen or bathroom as needed.

What to Look For When Finding a Mold Remediation Company

  • The Right Price Reputable mold removal companies will never cost more than necessary. They thoroughly inspect homes and suggest the works necessary to return the home to the healthy state. Be wary of businesses that may inflate prices or charge pad fees.
  • The Right Ethics Choose reputable businesses in the location and nearby areas. They should offer fair prices and only recommend work that is necessary for you to restore your home and ensure your family's safety. Reputable companies stand behind their work with 100%.
  • The Right Time NOW! If you notice mold and you're concerned about it, you'll want to get rid of it quickly. Call for someone to start the drying process to determine the root of the issue, and begin testing to find out the best way to fix the problem.
  • The right practices Be sure the mold removal company uses safe methods for your family. For example, proper techniques such as HEPA vacuuming for dust and spore control are always preferable over misting, which can bring additional moisture into the zone.
  • The right credentials Find technicians certified in WRT (Water Restoration Technician), ASD (Applied Structural Drying), and AMRT (Applied Microbial Remediation Technician).
  • The Right Team Professional teams adhere to the most stringent standards throughout the day. From the very first phone call until the post-remediation inspection They should treat every customer like family and each home in the same way as it was their own.
 

We're Here To Help!

Phone us now: 1-888-217-6019

 
Updated April 23, 2025