Mold Removal in Rockledge, FL Florida 32955
Do you require the help of a Licensed Mold Removal Company ASAP?
Call 1-888-217-6019 now.
Expert assistance is just a call away.
Simple Signs You May have a Mold Issue
- The smell of mold is quite distinctive. It's a unique smell. Even if you don't see anything, you still know that it's there.
- visible microbial growth. Dark splotches on the walls, ceiling, floors, or baseboards. Splotches on the ceiling may indicate a leaking roof or a burst pipe or condensation in the ductwork. Dark spots or brown or black mold that are visible on the walls may indicate cracks or burst pipe in the wall. It may be a slow leak, but the damage will only get worse.
- soft moist spots on the floors, walls or Ceiling. This could indicate that there is microbial growth may be present. Mold may have not been visible right now however it may be hiding behind the drywall or on the support studs, underneath the flooring or in the roof of your home.
-
Sudden Unexplained Illness.
Nagging coughing, headaches and nausea or feeling ill only when in home or in certain places. These symptoms that persist may indicate mold may be present. The four groups that are most vulnerable to the effects of mold are:
- Children
- Older people
- Immune Deficient
- Women who are pregnant
- Recent Water Event. The spores need water to grow, so the recent leak, flood, or sewer back-up could have caused the appropriate water activity required in order to support mold growth.

Superior Mold Removal
Fast, reliable mold removal services for a cleaner home and a healthier family. Certified experts, advanced equipment, and professional results. Call today!
Phone: 1-888-217-6019
FEATURED

Tristar Environmental Sltns
575 Gus Hipp Boulevard, Rockledge, FL
Administrative and Support and Waste Management and Remediation Services
Professional mold removal firms are equipped with the equipment, staff with the right training and experience to handle mold problems from the beginning to the completion. They will pinpoint your problem, determine the right path of action and begin the process right away.
Professionally trained and certified technicians can provide the services required to ensure your home safe to your family again.
Professional mold removal services typically include:
Water:
- Restoration of Water Damage
- Water Extraction
- Flood Damage Repair
- Dehumidification
Mold:
- Certified Mold Inspections
- Mold Damage Remediation
- Air Quality Testing
Areas served:
Mold remediation services are usually offered in many locations, including but not limited to location and its surrounding areas, and the region beyond.Contact Mold Removal Experts 24 hours a day, 7 days a week.
Contact us, and help will be provided immediately! 1-888-217-6019Proudly Serving location
A wide array of services including water damage restoration, inspection, and mold removal is available. Call today to schedule the comprehensive mold inspection in your home or business. A Indoor Environmental Professional (IEP) can determine the type and extent of contamination in your property and help restore it to the healthy state.The typical 10 Step Method to Remove Mold
- Find the Source. Determine the origin of the water intrusion. The source must be identified and remedied in order to prevent the water intrusion occurring again. occurring again.
- Visible Inspection of the Inspection of the Damage. Expert technicians examine for obvious microbe growth by looking in places that may be missed.
- Diagnostic Testing. The equipment is specially designed to "sniff out" invisible mold and other mold that may be lurking in the walls, stud framing and drywall. Mold testing instruments ensure thorough identification. If necessary, air sample tests can be taken by an certified mold assessor or Indoor Environmental Professional (IEP). The IEP will take samples and tests every suspected room. Every mold is not the same, and the right tests will be able to distinguish deadly mold from merely nuisance mold.
-
Establish Containment.
Protection of the family and the remainder of the home against the airborne mold spores by creating containment. This establishes a safe area to allow removal of the mold to start. The type of containment that is used will differ depending on the area of contamination:
- Source: small areas of contamination, less then 10 square. ft. Bagged and removed.
- Local: One room which can be sealed off and remediated, usually 10 sq. ft. to 100 sq. ft.
- Full-Containment areas where there is a need for a temporary containment barriers in order to prevent cross-contamination. Used to seal off the entire area or multiple rooms.
- Air Filtration. Installment of small portable air filtration units to cleanse the air and improve air quality in the home. In order to protect the family from the spread of airborne pathogens can be achieved by creating negative air pressure between the air-contaminated zone and the remainder of the home.
- Take out the Mold. Behind safety barriers, the technicians start to remove materials affected by mold. This may include baseboards, drywall and sinks, cabinets or counters, and flooring in the kitchen. Removal of drywall covering ceilings or insulation may be necessary if the roof leak occurred. It could involve removing tubs or fixtures in the bathroom if the water has penetrated the walls as a result of leaky pipes. Highly skilled technicians are meticulous in keeping what is kept while also ensuring removal of all traces of mold.
- Mold Treatment. Once the damaged materials are removed, professional-grade treatment and removal tools are applied, following IICRC guidelines. The rest of the surfaces are then cleaned and treated.
- Air Purification. After removal and treatment is complete, air purification is performed for a number of days.
- Post-Remediation Air Sample Testing. After the air purification process is completed after the air purification protocol is completed, after the post-remediation air sample testing is conducted and must be awarded an acceptable score through the IEP.
- Equipment Removal. When the post-remediation testing is finished and air samples are considered acceptable by an certified mold assessor or IEP, containment barriers and equipment is removed. This creates a clear canvas to bring in contractors to replace flooring or flooring or redesign the kitchen or bath as needed.
What to Look For When Finding an Mold Remediation Company
- The Right Price Trustworthy mold removal companies will not charge for more work than needed. They carefully inspect homes and recommend actions necessary to restore the home to the healthy state. Beware of businesses that may overcharge you or bill you for pad costs.
- The Right Ethics Choose reputable businesses in location and the surrounding areas. They must offer reasonable prices and only suggest work that is necessary in order to restore your home and ensure your family's safety. Reputable companies stand behind their work completely.
- The Right Time NOW! When you have mold that is causing you problems, you need it removed immediately. Call for someone to start the drying process, pinpoint the source, and begin testing to find out the best way to fix the problem.
- The right practices Make sure that the mold removal company employs safe methods to protect your family. For example, appropriate methods such as HEPA vacuuming for dust/spore control are superior to misting, which can introduce an increase in moisture into the space.
- The Right Credentials Look for professionals certified in Water Restoration Technician (Water Restoration Technician), ASD (Applied Structural Drying), and AMRT (Applied Microbial Remediation Technician).
- The Right Team Professional teams operate in accordance with the most stringent standards throughout the day. From the beginning of the phone call to the post-remediation inspection the team should treat every customer like family and each home as if it was their home.
We're Here To Help!
Phone us now: 1-888-217-6019
Updated May 18, 2025